Ruihe Good Processing Performance HTV Silicone Extrusion Seal Strip
Description
RH7022platinum cured silicone rubber for silicone products.
The silicone rubber is a two-component liquid silicone rubber for injection moulding processes.
RH9140-30ZA/B can be used to produce textile fabric printing and fabric-ribbon print products
Features:
· Good processing performance, tight coating, ono-stick copper wire and good physical properities.
·Comply with US FDA CFR 21.Part.177.2600 and European EN14350-2, Section 4.9 Volatile Compound Test Standards and European ROHS and REACH Standards;
·In the environment of 20 °C, the safe operation time is 3 days after the A/B components are mixed and sealed, and the safe operation time is shortened when the temperature rises
Typical Properties
| RH7022 A/B |
| | Unit | Part - A | Part - B |
| Appearance | / | tranparent | tranparent |
| Shore A Hardness | A | 71 |
| Tensile Strength | MPa | 9.0 |
| Elongation | % | 350 |
| Tear Strength | KN/m | 25 |
| Density | g/cm3 | 1.21 |
These figures are for reference only, please contact us for details.
Mixing ratio of components A : B =1 : 1
Vulcanization: 175 / 5 min
Main application
- Extrusion tube
- Extrusion seal strip
- Wire and Cable
- Calendered silicone sheet
Packaging & Storage
Available in 20kg carton, lined with plastic bag
Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.
Notice
This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.
Certificate
Rui-He 7022silicone rubber obtained the following test certificate: RoHS, FDA.21.177, REACH, PAHS, ISO9001:2016, etc
FAQ:
1.Q: Why you should choose us?
A: You will find a reliable suppliers(the best choice)when you received the samples from us.
2.Q: Do you allow small quantity order ?
A: We accept small quantity order and also pay attention to each of our clients.
3.Q: Can you print custom logo on the product?
A: Yes, we can silk-screen print and pad print on it.
4. Q: What are all the ways to form silicone (e.g. die cut, compression molding, etc.)?
A: High temperature vulcanizing machine mold.
5.Q: What should I care of silicone product?
A: Silicone is easy to care and clean. Regularly you can wipe the outside of the product with a damp cloth, using a liquid
soap where necessary to keep the surface clean. If the silicone contacts any part of the body, clean it regularly with warm
soapy water.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices in website because prices fluctuate for many reasons.
Product Tags:
|
|
Translucent Solid Silicone Rubber HTV Silicone Extrusion Seal Strip Images
|
